| INTRODUCTION: |
The Rewaco HS4 Trike pictured is a one-owner, well looked after, pride of place unit. This trike is reluctantly offered for sale by the owner (trike originally located in Bell, Central QLD, now located at our factory). The Rewaco HS4 Trike is immaculate, well maintained and fully optioned.
The Rewaco HS4 is fitted with Sportsline Front Fork, wide 180 front tyre, wide 5” alloy rim with stainless steel spoke mounted to a polished stainless steel billet hub, polished stainless steel running boards, polished stainless steel passenger arm rails and top box (purchased new in 2007 – the topbox is our current style, designed for better water resistance).
In March 2007 the trike was driven up to our factory in Cairns and upgraded with a new Performance 2007cc custom-built VW Engine. This engine provides substantial performance over the old 1600cc engine and provide ample power for over-taking and towing the customers trailer. The engine is all performance featuring a forged Chromoly 78mm STROKER Crankshaft for more torque and the response of dual HPMX IDF carburetors with big throats.
The trike was fitted with a tow-bar in March 2007 and the trike was used to tow a small aluminum trailer in the last 6 months (trailer not included).
This trike is in immaculate condition and was the owners pride and joy. If you are looking for a great trike with the best suspension available, performance engine, incredible handling and outstanding style, then this is the trike for you! Skip the wait and start riding today! Please find below further details. |
 |
Price: $34,800.00 (Reduced by -$5,000.) |
|
|
| TRIKE SPECIFICATIONS / DETAILS: |
| Rewaco HS4 Trike with Titan Trikes Sportsline Accessory Package |
VIN: |
6T9S50V973001X002 |
Model Year: |
2003 |
Compliance Date: |
05/2003 |
Registration No. |
739 BZ |
Engine No. |
R807001A |
|
|
Colour: |
Brilliant Italo-Yellow |
|
|
Odometer Reading: |
45,000km (less than 8,000km on the new engine). |
|
|
Rear Tyres: |
P295/50-R15 (Good Condition). |
Rear Rims: |
15x10" Wide - US Wheel, Deep-Dish Design, Chrome Plated. |
Front Tyre: |
180/55-17 (Good Condition). |
Front Rim: |
17x5.0 (alloy rim with stainless steel hub – 40 spokes). |
|
|
Fuel Tank: |
Stainless Steel – approximate capacity is 38 litres* (custom fabricated by customer – capacity as disclosed by customer). |
|
|
| Front Fork: |
Rewaco Sportsline (all ball bearing), polished stainless steel down tubes, billet alloy main sections, stainless steel triple trees, Bilstein Gas Shock Absorber, Brillant Spring. |
|
|
| Seats: |
Custom upholstered front and back Seat with extra thick cushions providing more padding. |
| |
|
| Topbox: |
2007 model topbox fitted. This topbox is the new design with a larger lip off the top lid section providing better water resistance of the box. |
| |
|
| Gearbox: |
VW Heavy-duty 4-speed gearbox with Reverse gear. |
|
|
Suspension: |
Bilstein Gas Shock Absorbers, Eibachi Springs. |
| |
|
| Instruments: |
Tachometer with Chromed Body and Bezel, Speedometer with Chromed Body and Bezel, Fuel Gauge with Chromed Bezel, Voltage Meter with Chromed Bezel. |
| |
|
| Gear Shift: |
Gear Lever is centre mounted in the chopper tank. Easy shifting. Same position as current production. Fitted with billet shift lever. |
| |
|
| Running Boards: |
Polished Stainless Steel with aluminum cruise plate fitted. |
| |
|
| Passenger Arm Rails: |
Polished Stainless Steel with soft black arm rests. |
| |
|
| Brakes: |
Disc Brakes all round with handbrake operating the rear brakes. |
| |
|
| Exhaust: |
Customised Stainless Steel Chopper Exhaust |
| |
|
|
New Custom-Built Performance Engine – 2007cc (Fitted March 2007) -
ENGINE
SPECIFICATIONS:
- Forged Chromoly 4340 Performance 78mm Stroke Crankshaft. Nitrided, shot peened, cross drilled and balanced. 8-Dowel Pins.
- Forged 90.5mm pistons
- Forged Chromoly I-Beam 4140 Con-rods
- Forged 4340 Chromoly lightened flywheel
- Forged Chromoly Flywheel Nut and Washer.
- Performance Aluminum Bubble Top Case, pre-clearenced for up to 84mm stroke Crankshaft, Re-enforced in Numerous locations. Case Savers Fitted. Dowel pinned, Shuffle Pinned and Full Flowed.
- Pro Street Heads with Stainless Steel Valves, Double Valve springs, Chromoly Retainers, Chromoly Lash Caps, Chromoly Retainers.
- Forged Chromoly Rockers with Custom ratio of 1:1.25
- Dual, double through EMPI HPMX 40mm Carburetors with large air cleaners, custom throttle linkage.
- Electric Fuel Pump
- Remote Oil Filter Adapter
- High Performance Oil Pump (30mm gears) with Billet Machined Cover.
- Billet Aluminum Dipstick
- Billet Aluminum Oil Filer
- Full Engine Breather system.
- Braided Stainless Steel Fuel Lines and Oil Lines
- Chromed Engine Tinware and Accessories.
- And much more….
(the new engine cost $7,800 +installation in 2007) |
| |
|
| |
| Note: All trikes listed here are done so on behalf of the trike owner(s). Specifications and details quoted are subject to change and are the responsibility of the trike owner(s). We take no responsibility for the accuracy of the information published. The trikes listed are subject to prior sale by the owner(s). The trike maybe fitted with accessories, components or items not belonging to the standard. We do not assume any responsbility no do we accept any liability regarding the sale of the trike listed. All items listed by the owner(s) are sold on an 'as-is, where-is' basis with no warranty given or implied. |
|
|
|
